How Much Does It Cost to Print on Anycubic Kobra S1? (2026)
Printing on Anycubic Kobra S1 costs £0.50-£3.00 per print depending on size. A 50g print costs £0.50-£0.80 (material £0.64 + electricity £0.08), a 100g print costs £1.00-£1.50, and a 200g print costs £2.00-£3.00. Material is typically 85-90% of total cost, electricity is 10-15%. Use our cost calculator for your exact prints.
Cost Per Print by Size
| Print Size | Material | Print Time | Material Cost | Electricity | Total Cost |
|---|---|---|---|---|---|
| 50g | PLA | 2 hours | £0.64 | £0.08 | £0.72 |
| 100g | PLA | 4 hours | £1.28 | £0.16 | £1.44 |
| 200g | PLA | 8 hours | £2.56 | £0.30 | £2.86 |
| 100g | PETG | 4 hours | £1.60 | £0.20 | £1.80 |
*Costs assume UK electricity rates (£0.28/kWh), standard material prices (PLA £0.0128/g, PETG £0.016/g). Print times vary by settings.
Material Cost Per Gram
Material is 85-90% of your print cost on Kobra S1. Here's the cost per gram for different materials:
- • PLA: £0.012-£0.013 per gram = £0.60-£0.65 per 50g print, £1.20-£1.30 per 100g print
- • PETG: £0.016-£0.018 per gram = £0.80-£0.90 per 50g print, £1.60-£1.80 per 100g print
- • ABS: £0.017-£0.018 per gram = £0.85-£0.90 per 50g print, £1.70-£1.80 per 100g print
Use our cost per gram calculator to compare material prices and find the best deals.
Electricity Cost Per Print
Electricity adds 10-15% to total print cost. Kobra S1 uses 120-180W during printing.
- 2-hour print: £0.08-£0.12 (150W average × 2 hours × £0.28/kWh)
- 4-hour print: £0.16-£0.24 (150W average × 4 hours)
- 8-hour print: £0.30-£0.45 (150W average × 8 hours)
- 12-hour print: £0.45-£0.68 (150W average × 12 hours)
Calculate exact electricity costs with our electricity cost calculator.
Monthly Printing Cost Estimate
For typical hobby use (10-15 prints per month, average 80g each):
- Total material: 800-1200g PLA
- Material cost: £10.24-£15.36
- Print time: 20-30 hours
- Electricity: £1.60-£4.50
- Total monthly cost: £11.84-£19.86
For heavy use (30-40 prints per month, average 100g each):
- Total material: 3-4kg PLA
- Material cost: £38.40-£51.20
- Print time: 60-80 hours
- Electricity: £4.80-£12.00
- Total monthly cost: £43.20-£63.20
How to Reduce Printing Costs on Kobra S1
- • Buy filament in bulk: 5kg spools cost £0.010-£0.011 per gram vs £0.013 for 1kg spools (saves 15-20%)
- • Optimize infill: Reduce infill from 20% to 10-15% for non-structural parts (saves 25-50% material)
- • Print multiple parts: Batch printing reduces warm-up time and improves efficiency
- • Use appropriate layer height: 0.2mm vs 0.1mm saves 50% print time (reduces electricity)
- • Monitor print failures: Reduce failure rate to minimize wasted material and reprints
Calculate Your Exact Print Costs
Enter your specific print details below to get exact cost breakdowns for your Kobra S1 prints.
Or open the full calculator in a new tab for easier use.
Frequently Asked Questions
How much does it cost to print on Anycubic Kobra S1?
Printing costs on Anycubic Kobra S1 range from £0.50-£3.00 per print depending on size. A 50g print costs £0.50-£0.80 (material £0.64 + electricity £0.08), a 100g print costs £1.00-£1.50, and a 200g print costs £2.00-£3.00. Material is typically 85-90% of cost, electricity is 10-15%.
What is the material cost per gram on Kobra S1?
Material cost per gram depends on filament type: PLA costs £0.012-£0.013/g (£0.60-£0.65 per 50g), PETG costs £0.016-£0.018/g (£0.80-£0.90 per 50g), and ABS costs £0.017-£0.018/g (£0.85-£0.90 per 50g). Electricity adds £0.001-£0.002 per gram.
How much electricity does Kobra S1 use per print?
Kobra S1 uses £0.08-£0.30 in electricity per print depending on size and time. A 2-hour print costs £0.08-£0.12, a 4-hour print costs £0.16-£0.24, and an 8-hour print costs £0.30-£0.45. Average power consumption is 120-180W during printing.
Sponsored
Anycubic Kobra X – Early Bird $279 →Looking to Buy Anycubic Kobra S1?
Extra $40 off Kobra S1 Combo with coupon code ACS1C26 at Anycubic, or check Amazon.
*Affiliate link. Purchases help support this site.